Isuzu G-series Twin Cam

Oh also how hard is it to run wasted spark with the delco computer?? is there just outputs on the plug i can just wire up to some coil packs and ill be off or do i need a differnt memcal or complete unit.

Did the delco ever run a 4 banger with coil packs.

Thanks, Jason

Mine is AKFL 2168 it cost me $10 from the wreckers.

did you know about all this stuff??> ftp://ftp.diy-efi.org/pub/gmecm/

are these all maps. Ive seen another website with maps but cant find it now.

I am using the camira TPS thats why i think its stuffed. Im using the I-TEC type manifold and the TPS that was on it when i got it was broken. When i made a bracket to hold the camira TPS i had to mount it on the other side to the standard G200 one because it turns the other way. Do you know what si...

Thanks poida, ive got her timed up nicely and it runs properly now. I might just put a bottle of injector cleaner through it, pop on a new dizzy cap and rotor button and it should run a treat. Yeah its still got fault code 22. Any ideas? should i just try another TPS or does it need to be "trim...

Ok so what i done was a bit stupid but ive now modifyed my dizzy properly, i made a brass bush to joint the shafts. from the outside it just looks like a g200W dizzy body with a camira cap on it. Anyway its running now but its missing really bad. It idles fine but as it revs up it feels like the spa...

Ok so i picked up a camira dizzy from tthe wreckers and connected it up to my isuzu dizzy. What i done is pulled the sensor out of the isuzu one, and then joined it to the camira one with a piece of fuel tube over the shafts. THIS IS TEMPERARY. IM not a dodgy person i just wanted to see it i could g...

Alright i might try and put the guts out of the camira Dizzy into the G200W housing, that way it will just plug in and i know it will work.

Ive read before that someone has done this before, any help will be great.

Hi, what im trying to do is wire my stock G200W distributor to my Delco wiring loom. My G200 has the I-TEC type manifold, i think its out of a piazza and the Delco is out of a multipiont JE camira. The dizzy has 4 wires coming out of it and the loom has 6 wires. I know what the 6 wires are on the lo...

Oh sorry mate ive got one on the way. But if i need parts i know who to ask.
Thanks anyway.

Hey all, I just have a few questions regarding my injector timing system on my G200W. Does my engine have a crank angle sensor insid the dizzy? And do the stock computers run Sequential injection or do all the injectors fire at the same time? Correct me if im wrong so you dont need a crank angle sen...

Yeah ok ill take some photos tomorrow. The manifold is at a welding place getting pipe welded to the cast. I cut the stock exhaust manifold and welded 2 1/2 inch pipe to it. I only bogged it on there with an arc welder, no cast rods or anything. So there just gunna weld it up properly. Does anyone (...

Im pretty much after a distributor cap and leads to suit my G200. The cap i have now is smashed and the coil lead is gone. Its either another stock one or one off a different car. Does anyone know of another cap that will fit my distributor or another hole distributor that will fit in my engine. Che...

Oh ok then, it can be too important then. Ill just take all that crap off.

Oh what oil do you run?. Ive been told that these engines have shit oil pumps and are very sensative to the type of oil used.

Thanks

Na its definatly water. i havnt connected up the idle air control valve yet. there is 2 metal pipes that run around the front of the engine, then rubber hoses go up between the middle of the inlet manifold to the trottle body. The water doesnt actually get squirted into the engine or anything, i jus...

On my G200 im starting to look into plumbing up the cooling system. I then realised there is and odd number of places for pipes to go to. Then i realised that water flows through the throttle body. Why does water go through the throttle body, Is it for some form of choke devise. What im getting at i...