ZZ/R EFI sub wiring loom & components
-
Poida
- Administrator
- Posts: 334
- Joined: 26 Nov 2005, 12:48
- I live in: Vic
- Location: NSW-Victoria border
- Contact:
ZZ/R EFI sub wiring loom & components
I will soon be removing the original G180W (ZZ/R Gemini) EFI wiring sub loom together with all the sensors and associated components I will no longer need once I set up the Delco system. If anyone is interested in these give me a buzz. I'll sell them cheap as I won't be needing them and would rather keep them "in the loop".
Re: ZZ/R EFI sub wiring loom & components
An FYI (saves a new thread...)
Pinch A Part Melb (Campbellfield & Kilsyth) have ECUs (Engine Man. Comp.)on special from Saturday 12th of March to Friday 18th of March, 2011 for $30.00.
Though the sensors are needed for a proper install (ie, auto or manual ECU, then its sensors and loom - especially the "self adjusting" idle AFM etc, though only the dizzy's HEI module (not the dizzy or pickup etc - it's so inferior to the RB Gemini etc it's not funny)), it may be worthwhile as a spare etc.
JE Camira, Nissan N13, and what's that 1996 Hyundai whatever....?
MIght even get an LPG memcal eh?
Pinch A Part Melb (Campbellfield & Kilsyth) have ECUs (Engine Man. Comp.)on special from Saturday 12th of March to Friday 18th of March, 2011 for $30.00.
Though the sensors are needed for a proper install (ie, auto or manual ECU, then its sensors and loom - especially the "self adjusting" idle AFM etc, though only the dizzy's HEI module (not the dizzy or pickup etc - it's so inferior to the RB Gemini etc it's not funny)), it may be worthwhile as a spare etc.
JE Camira, Nissan N13, and what's that 1996 Hyundai whatever....?
MIght even get an LPG memcal eh?
IZU069 - Isuzu means a lot to me.